Metalized Polyester Film Capacitor

MEX CAPACITORS are constructed with  metalized Polyester film dielectric, copper
-ply lead, encapsulated in plastic case with
epoxy resin sealed. They provide interfere
-nce Suppression with safety approvals of
EN132400, IEC384-14, UL 1414
(125VDC) file No. E120045 and VDE
0585-1 class X2 (250VDC) file No. 15031
-4670-1D02.

APPLICATIONS:

THE TYPE-MAX CAPACITORS are ideal
for using Line-By-Pass, Antenna coupling,
Accross -The-line and (Spark killer circuits
and available for EMI filter and switching
power supply application.

FEATURE:

Non-induction construction.
Self-healing property.
Flame-retardant plastic case and epoxy resin.
(compliance with UL 94V- 0) High-moisture
resistance.
Good solderability.

SPECIFICATION:

1. OPERATING TEMPERATURE RANG: - 40 
    ~ + 85 ^oC
2. CAPACITANCE RANGE : .01 ~ 1µF
3. CAPACITANCE TOLERANCE: J = ±5%, K 
    = ±10%, M = ±20%
4. RATED VOLTAGE: 125VDC/ 
    250VDC,50HZ - 60HZ
5. DISSIPATION FACTOR: 1.0% MAX when
    measured at 1KHz. 25^oC
6. INSULATION RESISTANCE (IR): 
    Measured
    after a charging voltage 100 ± 15VDC for 1
    minute
    i) if C .33 µF, IR >15,000 MΩ
    ii) if C .33 µF , IR >5,000 MΩµF.
7. DIELECTRIC STRENGTH TEST: Applied
    1075 VDC for 1 minute or
    2000 VDC for 1 second.
8. HUMIDITY- TEST: Shall withstand the test 
    of RH 95% at 40^oC for 21 day. After the 
    test, the capacitance drift 5%, 1R 50% 
    of specified value. 
9. LIFE TEST: The test voltage 313VDC shall 
    be applied for 1008 hours in the + 85 ^oC
    chamber. During this period, 1000VDC 
    60Hz for a period 0.1 sec be applied once 
    each hour. After the test, the capacitor must 
    meet the following limits.
    (A) Capacitance drift 10% of initial value.
    (B) Insulation resistance 50% of 
          specified value.         

10. LEAD PULL TEST: Shall withstand a 
      steady pull of 4kgs applied axially for 10 
      seconds.
11. LEAD BEND TEST: The test consists of
      attaching a load of 1kg to the capacitor 
      90^o from the direction of lead egress, the 
      180^o in opposite direction and back to 
      starting point. The lead shall sustain two 
      cycles without breaking.
12. MARKING: Must be legible correct 
      and consists of capacitance tolerance, 
      rated voltage, type designation climatic 
      category, manufacturer's trade mark " 
      CARLI ", date and recognition marks